Health and Safety Plans (SB 198)
OSHA Inspections
OSHA enforces occupational safety and
health regulations by inspecting workplaces, issuing citations, and imposing
monetary penalties for violations of OSHA safety and health standards.
What can trigger an inspection of your
business? The government's priorities for scheduling OSHA inspections are as
follows:
- Investigation of imminent
dangers - any conditions or practices that could reasonably be expected to
cause death or serious physical harm to employees immediately or before
enforcement action could be taken (These investigation are conducted within 24
hours.)
- Fatality and catastrophe
investigations - any work-related incident that results in the death of an
employee or the in-patient hospitalization of three or more employees (Such
incidents must be reported to the nearest OSHA office by telephone or in person
within eight hours of the incident.)
- Investigations of complaints -
for example, complaints made by employees, and referrals
- Programmed inspections -
regularly scheduled inspections in "high hazard" industries
Inspections are conducted by compliance
officers, usually without advance notice. In states that have their own plans,
inspections are conducted by state inspectors. Workplace inspections must be
conducted at a reasonable time, generally during the employer's normal work
hours, and in a reasonable manner.
When an OSHA compliance officer arrives
for a workplace inspection, you have the right to deny entry and to demand that
OSHA obtain a warrant to inspect the premises. OSHA may get a warrant from a
judge in a simple and speedy fashion in advance of a proposed inspection or
after being denied entry. Your failure to object to the inspection or ask for a
warrant constitutes voluntary consent.
Representatives of the employers and
employees are entitled to accompany the OSHA inspector on the "walk around"
tour of the workplace. The compliance officer may interview employees privately
during the course of the inspection.
When an employer grants the inspector
entry for a limited inspection, such as one responding to an employee
complaint, it may object to expansion of the inspection to other areas of the
workplace. If an employer allows the inspector to enter but objects to the
inspection of certain portions of the workplace or interferes with or limits
any important aspect of the inspection, such as the taking of photographs or
videotapes, attaching sampling devices, or questioning employees, OSHA will
consider this a refusal of entry.
Small business exemption. In
low-risk industries, there is a small business exemption from programmed
inspections only.
Businesses with 10 or fewer employees are
exempted from programmed inspections, so long as they have an occupational
injury lost workday rate lower than the national average, as published by the
Bureau of Labor Statistics.
|
Save Time
To calculate your lost workday rate,
divide the number of illnesses and injuries or lost workdays by the total
number of hours worked by all employees for the calendar year. Multiply that
number by 200,000 (the base for 100 full-time employees working 40 hours a week
for 50 weeks).
The latest available figures, for
2002, indicate that the national occupational injury incidence rates for
private industry employers with between one and 10 employees was 2.7. Employers
with between 11 and 49 employees had an occupational injury incidence rate of
5.9. |
However, the small business/low-hazard
industry exception applies only to programmed inspections, not to inspections
triggered by safety complaints, accidents involving a fatality or the
hospitalization of two or more employees, or reports of imminent dangers or
health hazards. A lost workday rate higher than the national average can
trigger an inspection for cause.
What happens if the OSHA inspection turns
up something that doesn't meet the government's standards?
- Citations
- Variances
- Penalties
- Defenses
Citations
If a workplace inspection reveals
violations of safety and health regulations or of your general duty to provide
a safe and healthful workplace, OSHA will issue you a citation. The citation
will charge you with a particular violation, set a time for abatement or
correction of the condition, notify you of proposed penalties, and inform you
of the procedure for contesting the charge before the Review Commission, should
you choose to do so.
Citations are issued only to employees,
regardless of whether the violation may have been caused or committed by an
employee. When you as an employer, receive a citation, you have the choice of
correcting the violations and paying the penalties, negotiating with OSHA to
have the citation or penalties amended or withdraw, or contesting the citation
before the Review Commission. Before making the decision, you may request an
informal conference with the OSHA Area Director. OSHA policy is to attempt to
settle most cases, reserving litigation for the most significant cases. Only in
the most egregious cases will OSHA interfere with the operation of your
business by shutting it down. If you cannot correct the condition, you can
apply for a variance.
Variances
You may apply for a temporary variance
from a safety standard when compliance cannot be achieved by the standard's
effective date because of unavailability of professional or technical
personnel, materials, or equipment, or because necessary construction cannot be
complete within the prescribed time.
A permanent variance may be granted if you
can show that you can provide equivalent protection for your employees through
alternative means.
|
Practice Tip
You should apply for a variance as
soon as you know that there's a hazard in your workplace that will take some
time to fix, before OSHA gets involved, since the agency may decline to
consider a variance application when a hearing is pending on a citation.
|
Penalties
The maximum penalty for a serious willful
violation of OSHA is $5,000; the maximum penalty is $70,000. The minimum "base"
penalty for a non-serious willful violation is $5,000. However, this penalty
amount can be seen as a "starting point." Proposed penalties may be reduced
based upon the following factors.
- The gravity or seriousness of the
violation: how severe is the potential harm from employee exposure to the
hazardous condition, and how probable is it that harm will in fact, result (the
base penalty amount can range from $1,500 to $7,000)
- Your good faith (such as cooperation
in eliminating the problem); the penalty amount can be reduced by 15 or 25
percent in recognition of an employer's good faith
- The size of your business: the penalty
amount can be reduced by as much as 60 percent for employers with 25 or fewer
employees
- Your inability to pay the proposed
penalties because of financial difficulties
- Your history of violations: the base
penalty amount can be reduced by 10 percent if the employer hasn't been cited
by OSHA in the last three years
Defenses
You may defend against a citation by
showing that:
- You lacked knowledge of the
violation.
- No employees were exposed to a
hazard.
- The violation was caused by an
unanticipated employee violation of your work rule.
- Compliance with the standard would
have created a greater hazard to employees.
- Compliance with the standard was
impossible or not feasible.
Defenses to a general duty
violation. In order to establish that it was the employee's misconduct and
not you who is responsible for a citation under the general duty clause, you
must show that:
- The employee violated a well-enforced
work rule.
- The worker's conduct could not be
predicted.
- The conduct could not be
prevented.
The clause requires employers in all types
of business to take OSHA seriously and to carefully maintain safety and health
compliance. |